Heat Pumps
There is sometimes some confusion on the manual, people talk about the "Boost heat" option.
However, this option is only available for the W'eau Full-inverters and not for the mini-inverters.
The error code E20 means: abnormal failure of the inverter module.
After this error code, the heat pump will give a second, more specific error code. Below is an overview of the most common error codes:
Error code E20 + 288
- Heat pump installation is too close to a wall or obstacle. Front and/or rear.
- The installation space where the pump is located is too small
- The ambient temperature is too high, causing the high temperature for the IPM module.
- A fault in the fan motor. Check if the fan motor is running in normal condition, if the fan is not running, check the fan motor wiring or try a new fan motor replacement.
Didn't find a solution?
Of course, it is always possible that there is a malfunction of the heat pump. If the solution is not mentioned in the above known error codes, please contact us. We will look for the right solution together.