iSaver

The problem of an E002 message is caused by an excessively high output current. This is more common in situations where there are many voltage fluctuations on the electrical network. You can fix this by connecting the pump to another group via an extension cord, for example.

This option is not activated and this cannot be done.

The iSaver 1100 and iSaver 2200 do indeed visually have multiple output relays, however, they are not activated and this option is not possible. The manufacturer chose to make 1 mold for different types. For now, we only sell the types with 1 active output.

An iSaver turns a non-variable pump into a variable pump. This means it will pay for itself in the long run since your pump does not always have to run at maximum power. Of course we cannot calculate exactly how much you will save as this depends on your pump as well as your consumption. We have heard from customers that with current energy prices they have already earned back the cost of the device after only 2 months.

The iSaver 2200 is suitable for all pumps with 2.2 Kw and 12 amp power and everything below. You can always find the technical data of your pump by doing a quick google search based on the type of pump you have. If you are not sure you can always inquire via our customer service.

The iSaver 1100 is suitable for all pumps with 1.1Kw and 6 amp power and everything below. You can always find the technical data of your pump by doing a quick google search based on the type of pump you have. If you are not sure you can always inquire through our customer service.

The pump is connected directly to the iSaver. This controls the pump in time. If the frost protection then cuts the power to the iSaver, the pump automatically shuts down as well.