Instructions for use for these slow-release chlorine tablets
Adjust the pH of the water between 7.0 and 7.4. CHLOR-O-GALET preferably open and manipulate in open air, out of the wind. Through the skimmer or dosing float, add 1 tablet per 30 m³ of pool water. (Do not throw directly into the pool to avoid staining!) Never add water to the product. Check the chlorine content regularly, the recommended value is between 1 and 2 mg liters of pool water (= 1 and 2 ppm). After addition, always check the chlorine and cyanuric acid levels before using the pool again. Do not use the pool until the chlorine level has dropped to 2 ppm. Do not exceed the maximum cyanuric acid content of 70 ppm (70mg/l)! Dosages depend on the temperature and use of the pool. Test kits for determining pH, chlorine and cyanuric acid levels are available in our webshop.