Save up to 80% energy
Through the iSAVER, you set what power - what speed (between 1200 and 2900 rpm) - your pool pump should run and when. Set an energy-efficient mode for different situations - different applications. The pump then independently runs the set program at the specified time. These set energy-efficient modes drastically reduce energy costs.
25% quieter
When the pump runs at a lower speed, the user experience is also a lot more pleasant. The lower the speed at which the pool pump runs, the less noise the pump makes. Thus, the noise level falls by up to 25%. Your eventual neighbors will also be happy about it.
4 adjustable timers and 3 standard modes
During 1 24-hour day, you have the option of setting 4 different modes that can be timed. So for each pool function you set an individual mode. For example, a night mode, a start-up mode, a filtration mode and a heating mode. You attach a time limit to these modes so that they automatically run together. Even when the unit turns itself off, the iSAVER remembers its last settings.
You can set your own modes, but you can also use the default settings. These are:
- Night mode (low): speed fluctuates between 1200 and 1650 rpm
- Day mode (average): speed fluctuates between 1700 and 2400 rpm
- Day mode (high): speed fluctuates between 2450 and 2900 rpm
Longer life of the pool pump
When your pump runs at a lower speed, it is less subject to wear and tear. Especially the mechanical seals benefit at lower speed. Again, your pump can last longer.
Better filtration of pool water
When the water moves more slowly, smaller dirt particles are removed from the pool much more easily. So even the person responsible for cleaning the pool helps you in the saddle with the iSAVER.
Environmentally conscious win-win
Because you save up to 80% in energy (costs), the huge greenhouse gas emissions are also reduced. Thus, a win-win situation.
Connecting iSAVER+
Connecting the iSAVER+ 2200 is also very easy. It is sort of an extension of your standard pump plug. You plug the pump plug into the pump output of the iSAVER, and the plug of the iSAVER into the wall outlet. Note that you still need to hang the unit somewhere and the cables must be long enough. The output cable of the iSAVER is about 93 cm, and the plug is about 88 cm. When installing the device, always follow the instruction manual.