The frost-proof electric box with digital display is a complete kit and can be adapted to all existing installations to manage the active winterization of your pool.
- Outdoor installation: allows measurement of ambient air temperature.
- Indoor installation: to measure the temperature of the technical room.
- Plumbing: to measure pool water temperature.
It will force the start of your filtration once the set temperature you have programmed is reached. Starting your filtration pump will set the water in your pool in motion to prevent it from freezing.
The Astral frost protection kit is easy to install and allows you to actively winterize your pool without lowering the water level in your pool. Opening your pool will also be greatly simplified.
Available in manual or digital versions, these boxes are the best way to protect your pool and hydraulic system. They will simplify winterizing your pool. The frost protection box comes with the CTN probe.
Simple electrical connection, 220 v power supply and a connecting cable (2 wires) to be connected to the forced control or in parallel to the contact of the programming clock of your filtration cabinet.
Features
Ideal in the case of active wintering, the thermostat allows to make the pipes and partially the water body safe during the periods of frost and during the periods of high outdoor temperatures thanks to its system of regulation and its probe will allow to :
As soon as frost (0°C) approaches, the control relay turns on and the pool pump starts circulating the water, preventing the pipes and possibly the surface from freezing.
Thanks to its high alarm function, the box can also be used in the middle of summer to run the pump in case of high outdoor heat (e.g. at over 30°C), in order to prevent algae from entering the pool.
- IP54 waterproof housing
- CTN probe
- Digital display
- Adapts to any existing installation
- Complete frost protection kit
- Simplified winterization and opening of pool
User Guide
- Press the SET button for more than 2 seconds.
- The setting value is displayed and the °C LED flashes.
- Change the desired value with the ▲ or ▼ keys within 10 seconds.
- To save the new setting value, press the SET button again or wait 10s.
