Compact and digital measuring and dosing equipment for private pools and spas
The Security Pool Plus combines 2 controllers and 2 dosing pumps in 1 unit, driven by a digital multi-parameter electrode! The Security Pool comes with a complete installation kit, including: combined pH and ORP electrode
with temperature sensor and grounding pin suction and injection lines drilling saddles (diam. 50 mm) coupling for injectors calibration fluids pH and redox, manual.
Unique concept
- Measures pH, redox and °C accurately and reliably simultaneously
- Easy and faster to install
- Silent peristaltic pumps with adjustable flow rate (0.5 to 3.5 l/h) for spas to large pools
- Proportional dosing
- Delay time adjustable at system startup
- Large backlit and easy-to-read LCD display showing pH, ORP and temperature values simultaneously
- Log function and GLP values of electrodes, memory with last calibration data, password protection
- Automatic calibration (will reject calibration if deviation is too large from electrodes)
- High and low alarm
- Analog output for PLC control or data transfer to PC
- Multicolor LED for indication of measurement/dose/alarm condition
- BL122 version: with internet access
Safe and efficient
- Digital combined pH, ORP and temperature electrode with built-in grounding pin
- Mains power is provided through the circulator's electrical circuit
- Connection of flow switch optionally possible
- Adjustable alarm to prevent chemical overdose
- 'Intelligent' dosing depending on correct pH value
Complete kit
The Security Pool comes with a complete installation kit:
- Combined pH and ORP electrode with temperature sensor and grounding pin
- Suction and injection lines
- Drilling saddles (diam. 50 mm)
- Clutch for injectors
- Calibration fluids pH and redox
- Dutch manual
Automatic logging
Values for each parameter are automatically logged every 10 seconds: pH, ORP and °C values, last calibration data, configuration settings and any event data. For review and storage, data can be easily transferred to a PC using a flash drive and the USB port.
Proportionele dosering
The BL121-BL122 features proportionally controlled metering pumps. Based on the sensitivity of the process to chemical addition, the proportional band can be adjusted. This setting determines the time the pumps dose as a % of the deviation from the set point. For example, a large volume of water will use a small proportional band. A small band (e.g., 0.1 pH) will cause the pumps to dose more frequently when the value is close to the set point. For Jacuzzis or spas, it is more useful to set a larger proportional band (e.g., 1.0 pH). When the value is close to the set point, the time the dosing pump operates is minimal to avoid large fluctuations of pH or ORP. This valuable feature provides very fine control in maintaining the desired set point.
Regelbaar debiet
The flow rate of the metering pump is adjustable from 0.5 to 3.5 l/h. Larger pools require more chemicals to be dosed than small ones because it takes more chemicals to see a change in reading. The adjustable flow rate, like the proportional band, provides better control in maintaining a desired set point.
Programmeerbaar alarm
Low and high alarm levels can be enabled or disabled for all parameters. When an alarm is triggered, all dosing stops. The system also provides overdose protection; if the value is not corrected within a specified time interval, the meter goes into alarm status.
Digitale uitgangen
The digital outputs allow you to add a number of interesting options to the system: for example, a flow switch to control pump circulation or a level controller to check the liquid level in chlorine or acid tanks.