In addition to its use in swimming pools, the CTX-51 can also be used to clean surfaces such as painted; stone, plastic, etc. It works by penetrating and quickly removing oxide stains, foam, etc.
Dosage and instructions for use
1) Vacuum the pool
Pour the product onto the entire surface of the pool to be cleaned by distributing the product well over the walls and bottom. Allow the product to act for 30 min and then rinse thoroughly with water. If this is still not sufficient, repeat this step.
Tip: Apply the product with a sprayer.
2) Cleaning of surfaces.
Use the product pure or in an aqueous solution (from 10 to 20%), depending on the stains to be removed.
Precautions for use
- Before cleaning the pool, be sure to thoroughly wet the surfaces to be cleaned.
- After cleaning surfaces with CTX-51, rinse thoroughly with water to remove all product.
- When cleaning outside; avoid times when the sun is at its strongest, be very careful.
so that the product does not dry out. - For initial cleaning, it is advisable to use the product without diluting it.