Description
Speck Badu Magic II/8 pool pump 8m³
A pool is only truly enjoyable when the water stays clear, and that starts with a pump that reliably keeps running. Nothing is more annoying than a pump that fails after a few seasons or lacks the power to properly drive your filter and vacuum cleaner. The Speck Badu Magic II/8 solves exactly that problem: a solid, proven pool pump that has been proving its worth for years and stands for quality and reliability.
With a capacity of around 8 to 11 m³ per hour, it pumps your pool water calmly but steadily through the filter system, so that dirt is neatly captured and your water stays fresh.
Which pool is this pump suitable for?
We recommend the Badu Magic II/8 for pools up to approximately 40 m³ with average resistance. If your system is favourable (low resistance), it can even handle pools up to 44 m³. With higher resistance, there is still plenty left for a pool of around 28 m³. In short: a versatile choice for most private pools.
Where do you put it?
This pump works best below the water level, although it can also be placed above the water level thanks to its self-priming feature. For the best result, keep the distance between the pump and the pool between 5 and 10 metres — that is the range in which it can use its power optimally. Handy detail: there is enough suction power to also connect a pool vacuum cleaner, so you can effortlessly keep the bottom and walls clean.
Smart and future-proof
Would you like to save energy later on? The Badu Magic II/8 can be connected to a frequency controller, allowing you to adjust the speed after all. By default, it is a fixed-speed pump that you simply operate by plugging it in or out. The motor is thermally protected against overheating and is cooled by a fan, which contributes to a long service life.
Also suitable for salt water
Do you have a salt chlorinator system? No worries: this pump is salt water resistant and therefore holds up in more aggressive water. The connections fit pipes of 32, 38 and 50 mm, making it suitable for virtually any existing system.
The main features at a glance
- Capacity up to 11 m³ per hour (manufacturer's rating 8 m³)
- Suitable for pools up to approx. 40 m³
- Self-priming and salt water resistant
- Thermally protected with fan cooling
- Can be connected to frequency drive
- Power: 0.54 hp / 0.50 kW, 230 V with plug
- Connections: 32, 38 and 50 mm
- Noise level: 52.3 dB
- Dimensions: 49.3 x 18.4 x 31.9 cm
- 2 years warranty
Not sure whether this pump is the best fit for your pool and installation? At Pool.shop, we are happy to help you, so you can be sure you're making the right choice.
















