Description
Hanna Calibration Solution pH 10.01 (HI70010P)
A pH meter is only as reliable as the calibration behind it. With the Hanna calibration solution pH 10.01 (HI70010P), you set your meter precisely to the alkaline side of the scale, so that your measurements in your pool or spa water are spot on again. This buffer is supplied in a handy 20 ml sachet, intended for single use.
For clarity: this is the pH 10.01 buffer (at 25 °C). You can recognise it by the colour-coded label, so you can see at a glance which value you are holding – handy if you keep several buffers side by side.
Why calibrate with a 10.01 buffer?
For a good calibration, you preferably work with at least two calibration points: a neutral point around pH 7 and a second point that matches the range you are measuring. If you are analysing samples heading towards the alkaline side, this pH 10.01 solution perfectly complements your calibration. This way, you can be sure your meter is accurate across the entire measuring range, not just around the midpoint.
Why the individual sachets are so practical
Each sachet contains exactly enough fresh buffer for one calibration. This is ideal if you don't calibrate daily or want to measure on the go: you open a sachet, use it and discard the rest. No bottle that gradually ages after opening. The light-blocking foil also protects the liquid against UV light, so the buffer retains its exact value until the moment of opening.
Tips for a reliable result
If you want to get the most out of your measurement, keep a few things in mind. Use a sachet only once – reusing it makes the calibration unreliable, as the buffer can become contaminated by your electrode. Rinse your electrode with clean water before immersing it and pat it dry, so you don't introduce residual water into the buffer.
Also pay attention to the temperature: the stated pH 10.01 applies at 25 °C. Each sachet has a handy temperature table showing the actual pH value at other temperatures, so you can correct for it when working in a warmer or cooler environment. Finally, always check the expiry date stamped on the sachet – an expired buffer gives you a false sense of accuracy.
Not sure about the right choice?
The HI70010P fits seamlessly with Hanna pH meters and many other devices with a pH electrode. If you're not sure whether this buffer suits your meter and measuring situation, or if you would like advice on a complete set of calibration solutions, Pool.shop is happy to help, so you can keep an eye on the pH of your water with peace of mind.