Description
The Elecro Evolution 2 is a powerful electric pool heater that brings your water up to temperature quickly and reliably, even when it gets cooler outside. The entire internal construction is made of titanium, giving the unit excellent resistance to corrosion and allowing it to be used without worry in pools with a salt chlorinator. Place the heater in a dry, covered technical room and fix it with the supplied brackets horizontally or vertically to the wall or floor.
- Fully titanium internal construction, suitable for salt water
- Heats pools up to 55 m³ to a maximum of 45°C
- Includes connection pieces for 38 mm and 50 mm pipes
Elecro Evolution 2 electric heater 9 kW
With an output of 9 kW and an adjustable thermostat up to 45°C, the Evolution 2 heats pools up to approximately 55 m³ to a pleasant temperature. Thanks to the supplied connection pieces of 1.5″ (38 mm) and 50 mm, it connects smoothly to both built-in pool installations and above-ground pools from brands such as Intex and Bestway. The minimum flow rate is 1 m³/hour and the maximum flow rate is 17 m³/hour, allowing the heater to be easily integrated into an existing filtration circuit without any modifications to the hydraulics being required.
Electrical connection: 400 V three-phase
The Evolution 2 9 kW is designed for 400 V three-phase power and delivers its full output of 9 kW on that connection, with a current draw of around 13 A per phase. A single-phase connection via an ordinary earthed socket is not sufficient for this model: a 230 V circuit with a 16 A breaker can supply a maximum of 3,680 W, which is well below the 9 kW the unit draws. The connection must therefore always be carried out by a qualified electrician on a correctly dimensioned, permanently wired three-phase supply with earth conductor, protected by a suitable circuit breaker and residual current device.
Safe and reliable in use
Safety is central to the Evolution 2. The appliance features built-in flow protection and switches itself off automatically as soon as the water temperature exceeds 60°C, preventing damage to the installation. Sufficient water flow is essential for reliable operation, and the appliance must be installed correctly according to the supplied manual. The Evolution 2 is intended exclusively for indoor installation or installation in a covered technical room, protected against rain, frost and direct weather influences.
