Description
As part of the maintenance of your pool water, regularly carry out a chlorine shock treatment; this way you swim more safely and prevent problems with your pool water.
Use:
Adjust the pH value of the water to between 7.0 and 7.4.
Make sure the filter system is running when adding the product.
Dissolve the granulate or powder in a bucket of pool water and then add it evenly distributed over the entire pool water surface.
Never add water to the product, but always add product to the water.
Dosage:
A 25 gram measuring cup is included in the packaging.
For a shock treatment (cloudy or green water), add 3 measuring cups per 10 m³ of water.
For regular maintenance, add 1 measuring cup per 10 m³ of water every 2 days, preferably in the evening.
Always check the chlorine level and cyanuric acid before using the pool again.
Do not use the pool until the chlorine level is below 2 ppm.
The maximum cyanuric acid level of 70 ppm (70 mg/l) must not be exceeded.
The dosages depend on the temperature and the use of the pool.












