Description
Bestway Flowclear sand filter pump - 11.3 m³/h
Keeping your pool nice and clear? Then, depending on the size and the resistance of your pool, this is the sand filter pump you need. This sand filter pump pumps up to 11,355 litres of water per hour. This makes this Flowclear sand filter pump suitable for pools with a water capacity of up to 45,400 litres. Do you have a bit more resistance, think of a salt water system and/or heat pump? Then keep to a lower maximum water capacity.
- Excellent for pools up to 45,400 litres
- Most efficient filtration technique; no cartridges, but a filter tank with medium
- Easy to install on pools with a 32 mm connection
Effective filtering
This sand filter pump keeps your pool water moving, giving algae, bacteria and fungi virtually no chance to develop. Your pool water is completely pumped round by this pump within a period of approximately 4 hours. Of course, this depends on the size of your pool. The pump pumps the pool water through a filter tank, which must be filled with filter sand. This filter medium is much more effective than a filter cartridge; fine particles are captured better. This keeps your pool water fresher, cleaner and clearer. Furthermore, the filter sand of this pump only needs to be replaced once every few years, whereas a cartridge must be replaced every two weeks.
Filter medium: sand or Polysphere
You fill the filter tank of the Flowclear with filter sand or polysphere. These are not included as standard. This sand filter pump works with normal filter sand of 0.45 - 0.85 mm size (55 kg), but for optimal cleaning this Bestway sand filter pump should be filled with 1.54 kg Bestway Flowclear Polysphere.
With 6-way valve
The Bestway Flowclear sand filter pump is equipped with a 6-way valve. This means that this filter pump has the following 6 settings:
- Filter: water flows from top to bottom in the filter tank (99% of the time)
- Backwash: water flows from bottom to top in the filter tank to rinse the filter material (when you notice reduced filtration/flow)
- Rinse: rinsing away dirty water after backwashing
- Close: you close all inlets and outlets
- Waste: draining pool water directly to the drain (when you want to lower the water level)
- Circulate: letting water circulate only, without passing through the filter (nearly essential when treating with chlorine shock, e.g. for green pool water)
Operation with built-in timer
This sand filter pump can be operated via a built-in timer. This way, you can simply leave the pump switched on. You set a time period as desired, e.g. 8 hours, during which the pump pumps the pool water through the filter tank. This then happens automatically each time between the set times.
Easy to place and install
Always place the sand filter pump below the water level. This can simply be done alongside the pool. The two standard included hoses are 3 metres long. Try to keep to this maximum distance. (Please note that too long a distance will affect the pump capacity.) The standard connection is 32 mm. To be sure, check whether this is also the connection of your pool. With the included handy hose clamps and connectors, you can seamlessly connect the hoses to the inlets and outlets of the Bestway sand filter pump and the pool. The included manual tells you exactly how this works. In addition, this sand filter pump is pre-assembled for extra convenience.
Other features Bestway Flowclear
- With a sieve for separating leaves and other coarser dirt
- Fitted with an easy-to-read pressure gauge
- Has a durable and rust-resistant filter tank
























