HTH Chlorine Shock Inorganic – 2.5 kg

Instructions for use

Always first measure the current chlorine and pH level with a tester so you know how much chlorine to add. Then mix the correct amount of chlorine granules first in a bucket with warm water or pool water before adding it to the pool. Check the packaging to see exactly how much you need. Once the chlorine granules have dissolved properly, you can spread them evenly over the pool. We recommend not swimming in freshly treated water until the chlorine level has dropped to the recommended level. Run the sand filter system continuously for 24-72 hours.

Safety instructions

Never use chlorine granules at the same time as other chemicals. This can release chemical gases. Always add chlorine granules to the pool water and never the other way around. You can rinse the packaging with pool water once it is empty. After that, you can safely dispose of it. Always store pool chlorine in a cool and dry place in a sealed container. And perhaps most importantly; never use other types of chlorine to disinfect the pool. Always read the safety instructions on the packaging.

Features

• Unstabilised chlorine
• Supplied in powder form
• Approved chlorine for use in pools
• Also available in a 1 Kg packaging and a 5 kg packaging

Safety

Always close the packaging properly and keep out of the reach of children.