Description
Maxi-flo is a tube heat exchanger with excellent heating properties. It is made of acid-resistant stainless steel AISI 316L for an optimal lifespan. Easy installation with the included adjustable stainless steel fittings. Capacity range 40-120kW. Maximum pressure of the secondary circuit (pool water) is 5 bar and the primary circuit (hot water) is 10 bar. Suitable for pools up to 450 m³
Features
- Acid-resistant stainless steel
- Precisely welded outer casing
- 37 seamless tubes fitted with flow limiters for hot water
- Adjustable brackets made of acid-resistant stainless steel
- Four sizes: 40, 60, 75 and 120 kW
- Connects to existing heat source
- Can be connected in series if required.
- Mounted vertically
Pahlen Maxi-Flo MF135 heat exchanger for the pool
A beautifully designed stainless steel heat exchanger with excellent performance. The Pahlen Maxi-Flo MF135 is a universal heat exchanger that you can use with all types of existing heating systems to heat your pool. Think of the central heating boiler, the water heater or the solar panels on the roof. You place the Pahlen Maxi-Flo MF135 vertically within the plant installation. If you are looking for a heat exchanger that you want to place horizontally, choose the Pahlen Hi-Flow instead.
We call the heat source the primary circuit, the pool water the secondary circuit. The pool water must always flow in the opposite direction, as this results in much better heat transfer. The water coming from the heat source must be under sufficient pressure through the use of a pump, and air bubbles must be avoided. To ensure that the heat exchanger heats up to the desired temperature, we recommend using a thermostat with sensor.
Capacity and consumption Pahlen Maxi-Flo MF135
The Pahlen MF135 is suitable for pools up to 130m3. At a temperature of 90 degrees from the primary circuit, the Pahlen Maxi-Flo MF135 has an output of approximately 40 kW.
Use and installation Pahlen Maxi-Flo MF135
The Pahlen heat exchanger is easy to install and can be mounted either horizontally or vertically, depending on the model. The Pahlen Maxi-Flo MF135 is installed in the plant room, close to the heating boiler. You connect the heat exchanger to the outlet of the filter system. For ideal flow and thus optimal heat transfer, we recommend using a bypass.
Features Pahlen Maxi-Flo MF135
- Suitable for water heater, central heating boiler, solar panels and heat pump
- Extensive documentation
All Pahlen Maxi-Flo heat exchangers
| Maxi-Flo MF 135 | Maxi-Flo MF200 | Maxi-Flo MF 260 | Maxi-Flo MF 400 | |
|---|---|---|---|---|
| Power at 90 °C | 40 kW | 60 kW | 75 kW | 125 kW |
| Max. m³ pool | 130 m³ | 200 m³ | 250 m³ | 450 m³ |
| Heating flow rate | 1.5 m³ per hour | 1.8 m³ per hour | 2.1 m³ per hour | 3 m³ per hour |
| Pool flow rate | 12 m³ per hour | 15 m³ per hour | 18 m³ per hour | 21.6 m³ per hour |
| Heating connection | 1″ | 1″ | 1″ | 1,5″ |
| Pool connection | 1,5″ | 1,5″ | 2″ | 2″ |
| View product |











