Description
Mini Inverter Plus 4.5kW pool heat pump – W’eau
Imagine this: it's early May, the sun breaks through, and you step straight into your pool without that cold shock. That's exactly what the W’eau Mini Inverter Plus takes care of. This compact 4.5 kW heat pump gently brings your pool water to a pleasant temperature and keeps it there, so swimming becomes truly relaxing again instead of “gritting your teeth”.
It's built for smaller to medium-sized pools up to approximately 14 m³ (and, with a somewhat longer heating time, up to a maximum of 18 m³), and it also heats a spa perfectly well. Thanks to Full Inverter technology, it never runs harder than necessary — and you'll notice that both on your electricity bill and in the peace and quiet of your garden.
A pool that stays pleasant for longer
With this heat pump you significantly extend the swimming season: from April through to October, you keep the water at the temperature you like. And because it can not only heat but also cool, your pool stays refreshingly pleasant during a scorching summer. This way, you get water that feels just how you want it, all season long.
Efficient thanks to smart Inverter technology
A Full Inverter heat pump adjusts its output steplessly. Instead of constantly switching fully on and off, it ticks over gently to maintain the temperature. This delivers an impressive efficiency: a COP of up to 10 under favourable conditions, meaning that for every kilowatt of electricity you get back a multiple in heat. The power consumption starts as low as 0.12 kW, so keeping the water at temperature costs surprisingly little.
Quiet in the background
At a distance of one metre, the noise level stays between 40 and 46 dB, and at ten metres you can barely hear it at 25 to 31 dB. Ideal if your heat pump is located close to a terrace or the neighbours' garden — you can relax in the sun without a humming appliance in the background.
Control it from your sofa
Thanks to the built-in WiFi module, you can control everything simply with your smartphone. You set the desired temperature, choose your programme and immediately receive a notification if something is not right. This way, you don't have to go outside every time to check whether the water is at the right temperature — you can adjust it just as quickly from your chair.
Built to last for years
Inside is a reliable Mitsubishi Twin Rotary compressor and a twisted titanium heat exchanger. This titanium exchanger is resistant to salt water, so whether you have a classic chlorine pool or a salt chlorinator system: this pump can handle it well. The sturdy ABS housing with extra internal reinforcement keeps out wind and weather perfectly well.
How it's connected
The W’eau Mini Inverter Plus is truly plug & play: it comes with a safety plug, so you simply connect it to an earthed 230V socket. In the box you'll find the 32/38 mm couplings, two hose clamps and a hose with coupling for the condensate drain, plus the manual. When positioning it, do allow for sufficient free space: at least 80 cm all around and around 250 cm on the air outlet side, so that the air can flow freely and efficiency remains optimal. Your pool pump must deliver at least 2 m³ per hour to feed the heat pump properly.
Not sure if this is the right size?
This model is ideal for pools up to about 14 m³ where you're looking for pleasant, economical heating. Do you have a larger pool or would you like advice on the right capacity? At Pool.shop, we're happy to help you choose the heat pump that suits your situation. You get 2 years' warranty, so you can enjoy warm water with peace of mind.












