Description
AquaSphere Signal UV-C Timer 40 watt
Green water, itchy eyes, and the endless hassle of measuring out chlorine: if you have a pool, you know the drill. The AquaSphere Signal UV-C Timer 40 watt takes a large part of that work off your hands. The water flows past a powerful UV-C lamp that neutralises bacteria, viruses, and algae, keeping your pool clear and fresh — with far less chemicals and far less hassle.
This unit is suitable for pools up to 40 m³ and handles a flow rate of up to 23 m³ per hour (recommended around 11 m³/hour). This makes it a practical choice for most private pools.
Less chlorine, less hassle
Where you would normally be constantly measuring and adjusting chlorine levels, the UV-C technology does the hard work here. The lamp neutralises organisms directly in the water flow, allowing you to reduce your chlorine consumption by around 50 to 80%. You also get a larger buffer in the water, so it stays clear and stable for longer — even when summer really heats up. Instead of measuring and adjusting daily, you simply have more time to enjoy your pool.
The smart timer that thinks along with you
The great convenience lies in the built-in LED timer. It shows you at a glance how the lamp is doing: green means everything is fine, flashing green warns that the lamp is nearing the end of its lifespan, and red indicates that it's time to replace it. So you don't need to keep track of how long the lamp has been running yourself — the hour counter does that for you. Have you replaced the lamp? Then you simply reset the timer and the countdown starts again.
Reliable and sturdily built
The unit contains a high-frequency electronic transformer that absorbs fluctuations in the power supply. This protects the lamp and ensures stable operation in the long term. The housing is made of stainless steel 316, and with a length of 100 cm and a diameter of 7.2 cm, the unit fits neatly into most installations. The maximum working pressure is 2 bar.
Easy to connect
Thanks to the included adapters, you can connect the unit to 63 mm, 50 mm, and 1½” internal thread. This allows the Signal UV-C to be easily fitted into virtually any existing pipework of your filter system.
Good to know
This version is intended for freshwater pools and is not salt water resistant. Do you have a salt water or salt chlorinator system? Then take a look at a specially developed salt water variant. Not sure which unit suits your situation? At Pool.shop, I'd be happy to help you with suitable advice.




