Description
Fairland – Controller Oval Inverter Plus – 3096010126
The oval controller is the control centre of your Fairland Inverter-Plus heat pump. On this touch display, you set the desired water temperature, switch the pump on and off, and keep track at a glance of how hard your heat pump is working. Is your display damaged, no longer responding, or showing faults? Then this controller is the right replacement part to make your heat pump fully operable again.
Important to know: this is a separate spare part, not a complete heat pump. So what you are buying here is the control unit that gets fitted back onto the housing of your existing Fairland pump.
What you can control with this panel
The touch control gives you all the relevant information on screen: the water temperature at the inlet and outlet, the selected mode (Smart or Silence), the heating capacity as a percentage, and the status of the Wi-Fi connection. This lets you see straight away whether your pump is running efficiently or extra quietly, and how much power is being used.
Operation is intuitive: hold the button down for about 3 seconds to light up the screen, then press the power button and unlock the display. After that, use the ▲ and ▼ buttons to easily set the desired temperature for heating or cooling. Using the mode button, you switch between Smart mode for the best efficiency and Silence mode for quieter operation — handy if the pool is close to the garden or the terrace.
Does this part fit my heat pump?
This oval controller belongs to the Fairland Inverter-Plus series, which includes models such as the IPH20, IPH28, IPH35, IPH45, IPH55, IPH70, IPH70T, IPH100T and IPH25. Not sure if this is exactly the right variant for your pump? Always check the type of heat pump and the shape of your current display. Replace an oval touch panel with exactly the same model, so that the connection and operation match seamlessly. If you're not sure, feel free to send us the type number of your heat pump — at Pool.shop, we're happy to help you find the right one.
Helpful tips for replacement
Always disconnect your heat pump completely from the power supply before disconnecting the old controller; this way you work safely and prevent damage to the electronics. When disconnecting, pay close attention to how the cable is connected, so you can reinstall the new controller in the same way. Not sure about the installation or not confident with this type of work? Then have it done by someone with technical knowledge of pool heat pumps. This way, you can be assured of a correct and safe installation and quickly enjoy comfortable pool heating again.
