Description
The Badu level control BNR 300 regulates the height of the water level in your pool/whirlpool. You set a minimum water level for your pool/whirlpool. The existing float recognizes the lack of water based on the set level. A solenoid valve is activated if the water level is below the required level for some time (e.g. after backwashing). It then ensures that water flows into the pool until the desired level is reached again.
- Safety shutdown with triple protection
- Supplied with the level probe
- Electrovalve 1/2"
- Temperature range : 5 to 50°C
- Time out start/stop : 1-4 minutes, (adjustable)
- Adjustable: 10 m
- Electronic control cabinet
- Mounting rail for the float
Benefits of the Badu BNR 300
- Automatic refill system for swimming pools
- Replenishes the lost water volume after a sand filter rinse, for example
- Comes with a level switch (float) equipped with 10 meters of cable (extendable to 25 meters) and mounting hardware
- Times are configurable, including a delay on power-up (e.g., during waves)
- Automatically shuts off if it refills for too long (adjustable from 5 to 180 minutes), which may indicate, for example, a pipe burst or leakage
- Ability to transmit alarm notifications acoustically or visually
- Supplied with or without solenoid valve (½"/230V)
- Thanks to its multilingual menu, the BNR 300 can be used worldwide.
Applications of the Badu BNR 300
The Badu BNR 300 is used to monitor the pool and technical environment.
