Description
The pH level in your pool or Jacuzzi is very important to have healthy pool water. When the pH is on point, disinfection will be better via chlorine than when the pH is too high. pH Plus from CTX comes in powder form so you can easily weigh it out.
Instructions for use pH plus
Dosing pool products must be done correctly to balance the water. The CTX-20 pH+ has a dosage of 150 g/10 m³ to raise the pH by 0.2. Thus, for a 50 m³ pool, 750 grams should be administered to increase pH by 0.2. If more than 0.2 pH needs to be added, we recommend doing this in 0.2 pH increments with an interval of 2 hours per dose. Dissolve the powder in lukewarm or warm water and then add all around into the pool.
Safety regulations
All pool products should be weighed before adding. NEVER add when bathers are present. First regulate pH to 7. 2 before adding chlorine. Always seal the plastic bucket tightly and store in a dry and safe place.