Description
iSAVER+ 2200 Tri frequency inverter for pool pump
Want to make your pool pump run smarter and more efficiently without having to buy an expensive variable-speed pump right away? Then the iSAVER+ 2200 Tri is a great solution. This frequency converter from Aquagem converts the fixed mains frequency to a lower frequency, giving you full control over the speed of your existing three-phase pump. The result: a quieter pump, lower energy consumption, and a system that simply lasts longer.
The great thing is that you don’t need to be an electrician to set this up. You plug your pump’s power cord into the pump output on the iSAVER and plug the iSAVER itself into an outlet—it acts as a sort of intermediary. Just make sure to mount it securely and that your cables are long enough; the output cable is about 93 cm and the power cord is about 88 cm.
Built to last for years
Where the iSAVER+ really stands out is its well-thought-out, robust construction. This is the first patented fanless variable-frequency drive for pool pumps, and that design choice was more deliberate than it seems: no fan means no moving parts that can jam, no dust being sucked in, and no points prone to wear and tear. Fewer parts that can break down simply means a longer service life.
Add to that the IP65 protection rating. This ensures that the housing is highly resistant to dust and splashing water—exactly what you need in the humid, sometimes dusty environment of a utility room or pump house. This keeps the electronics protected and ensures the device remains reliable for years to come.
A pump that wears out less quickly
Sustainability isn’t just built into the iSAVER itself, but also in how it affects your pump. By reducing the speed, your pump runs more quietly and under less strain. That means less mechanical wear on bearings and seals, resulting in a pump that lasts longer. An added benefit: a pump that runs more quietly produces up to 25% less noise—which is noticeable if your pool system is located close to the patio or the house.
Speed exactly to your liking
You can set the speed yourself between 1200 and 2900 rpm, in precise 50 rpm increments. This allows you to run the pump at exactly the right speed for the task at hand—no more than necessary. The preprogrammed settings are convenient: a night mode (low, 1200–1650 rpm), a medium day mode (1700–2400 rpm), and a high day mode (2450–2900 rpm).
With the built-in timer function, you can set up to four different modes within a 24-hour period that automatically transition into one another—such as a night mode, startup mode, filtration mode, and heating mode. What if the power goes out or you turn it off? No worries: the iSAVER remembers its last settings, so everything keeps running exactly as you planned.
Which pumps is it compatible with?
The iSAVER+ 2200 Tri is designed for three-phase pool pumps with a power rating of up to 2.2 kW. Here are the key electrical specifications: input voltage 230 V at 50 Hz, a three-phase output of 0–240 V, a maximum output power of 2.2 kW, and a maximum output current of 8 A. Not sure if your pump falls within these specifications? At Pool.shop, I’d be happy to help you make the right choice.
