By cleaning the evaporator or condenser with Griel soap®.
Some of the features of Griel soap
- Increases efficiency
- Reduced icing
- Convenient & fast
- Does not damage
- Protects the slats
all the absorption of energy by the free airflow between the blades are optimal. This results in lower energy consumption with better performance.
Because Grielzeep® provides a free flow of air, the balance in the system will not be disturbed, reducing the chance of ice formation.
Grielzeep® is ready to use and provided with a hand sprayer. Grielzeep® is therefore free to dose depending on the soiling of the evaporator or condenser of the heat pump or air conditioner. A cleaning takes barely 10 minutes.
Cleaning with a high-pressure cleaner causes the fins to be pushed flat, this is irreversible damage. A vacuum cleaner or air compressor are not powerful enough to remove the dirt between the fins, usually the heat pump is still equipped with grate or net, making the cleaning incomplete. Grielzeep®, on the other hand, also cleans between the fins and even the drainage area for the condensation water.
A protective coating in Grielzeep® also reduces subsequent soiling and makes the slats more corrosion resistant.
In addition, Griel Soap ® is biodegradable and therefore not harmful to plantings around the site of the heat pump.
Instructions for use in 4 steps
- Turn off the power to the device
- Spray evenly and in a smooth motion from top to bottom
- Let it soak for 10 minutes
- Rinse with running water in a smooth motion from top to bottom.
Always seal tightly and store out of reach of children.