AquaFinesse Spa Clean

You can use the Spa Clean perfectly when you purchase the spa or when you have not used the spa for a long time. In these situations there often remains a small amount of water in the pipes which can cause scale on the inside of the pipes. We recommend using a Spa Clean tablet every time you change the water. This is normally every 3 months.

Instructions for use AquaFinesse Spa Clean

• Remove the filters and raise the chlorine level in your spa to about 3 ppm before starting the deep cleaning.
• Make sure all nozzles and air valves are open, then dissolve a Spa Clean tablet by putting it directly into your spa water.
• Turn on the pumps and run them at maximum power for 20 minutes to ensure a good flow.
• Repeat the activation of the pumps at least 2 to 3 times during deep cleaning. The recommended treatment time is 12 to 24 hours.
• After treatment, drain the water in the spa and fill it with fresh tap water.
• Resume normal water treatment with AquaFinesse, for example

Safety instructions AquaFinesse Spa Clean

Always wear protective gloves when adding Spa Clean. Keep the product out of the reach of children and always store in a sealed container in a well-ventilated area. Always read the safety instructions on the packaging.

Features AquaFinesse Spa Clean

• Tablet form
• Packed by piece
• Repeat every 3 months